Sheaves

 

Sheaves
  Skookum Long Life Replacement Sheaves. 
   Manganese and Cast Steel.
 Reduce your sheave and wire rope replacement frequency. 
 Skookum sheaves get harder with use-vertually non wearing.  Normally increase service and life of wire rope.
 Cast-Steel sheaves are of heavy-duty design. 
 Most sheaves available with plain bore or a choice of 4-types of bearings: 
(1)Straight or tapered roller bearings (2)Bronze bearing
(3)Self-lubrication type bearings (4)Graphite bronze bearing

Sheave Design
Sheave design usually takes into account the following:
(1)Bending Stress induced in the wire rope.
(2)Radial pressure of the wire rope on a sheave, which is the function of the rope tension and tread diameter of the sheaves.
(3)Safe bearing pressure of the material used in the sheaves when the rope makes sufficient arc of contact with the sheave so that at least 1 rope lay, equal to about 6 diameters of the rope, is in contact with the sheave surface at all times.

Consider the comparative advantages before buying an inexpensive sheave material.  In the long run it can cost you more than you realize.  Your wire rope deserves the best and the best is offered by SKOOKUM.....Our product line is extensive, send for a catalog or
brochure today. Call us, write us, or email us (see listing on home page), we will respond immediately a provide you with the expert assistance to get your job done.... 

  
 Gold Standard Chain Shackles Gold Standard Anchor Shackles Forgings Sheave Numbers Home


Online Catalog Home

© Thomas Publishing Company, 2005